Table of Contents
Advertisement
1-4. Preparations for safe driving with children in the vehicle
1
Latch the buckles onto the LATCH anchors.
For owners in Canada:
●
The symbol on a child restraint system indicates the presence of a lower connector
system.
2
If the child restraint has a top tether strap, follow the child restraint manufactur-
er' s operation manual regarding the installation, using the top tether strap to
latch onto the top tether strap anchor.
3
After installing the child restraint system, rock it back and forth to ensure that it
is installed securely.
When installing in the rear center seat
There are no LATCH anchors behind the rear center seat.
However, the inboard LATCH anchors of the outboard seats, which are 15.7
in. (400 mm) apart, can be used if the child restraint system manufacturer's
instructions permit use of those anchors with the anchor spacing stated.
Child restraint systems with rigid lower attachments cannot be installed in the
center seat. This type of child restraint system can only be installed in the outboard
seat.
52
LATCH anchor
A
Canada only
A
Advertisement
Table of Contents
