Table of Contents
Advertisement
1-4. Preparations for safe driving with children in the vehicle
5
While pushing the child restraint system
down into the rear seat, allow the shoulder
belt to retract until the child restraint system is
securely in place.
After the shoulder belt has retracted to a point
where there is no slack in the belt, pull the belt to
check that it cannot be extended.
6
After installing the child restraint system, rock it back and forth to ensure that it
is installed securely.
Forward-facing - Convertible
1
Adjust the seat
●
When using the front passenger seat
If installing the child restraint system to the front passenger seat is unavoidable, refer
to
→
P.67.
●
When using the rear seat
If there is a gap between the child seat and the seatback, adjust the seatback angle
until good contact is achieved.
2
If the head restraint interferes with the child restraint system installation and the
head restraint can be removed, remove the head restraint. Otherwise, put the
head restraint in the upper most position.
3
Place the child restraint system on the seat
facing the front of the vehicle.
4
Run the seat belt through the child restraint
system and insert the plate into the buckle.
Make sure that the belt is not twisted.
56
Advertisement
Table of Contents
