Table of Contents
Advertisement
6-2. Using the safe driving support functions
the condition of the parking space, etc., if it is necessary to change the direction of
travel of the vehicle, the shift position can be changed by assistance control.
1
Stop the vehicle with it aligned near the center of the target parking space.
→ P.462
2
Press the Advanced Park main switch, check that a possible parking space is
displayed on the center display.
3
Select the
4
[OK] .
If the [MODE] button is displayed, the button can be selected to change between
the memory function, perpendicular parking (forward/reverse) function and parallel
parking function.
5
Exit the vehicle while carrying the electronic key and smartphone, and then
start the Remote Park app on the smartphone.
The detection area of the electronic key is within approximately 9.8 ft. (3 m) around the
vehicle.If there is a cone or other obstruction in the path of the vehicle, move it after
exiting the vehicle.
6
From outside of the vehicle, confirm the parking space on the screen of the
smartphone and then select the start button.
Start operation of Remote control function while standing approximately 1.6 ft. (50 cm)
or more from the vehicle and out of the path of the vehicle.
7
Checking the safety of the area around the vehicle, trace the operation area on
the screen of the smartphone continuously, the vehicle will move and parking
assistance will be performed.
If operation of the screen of the smartphone is stopped, assistance can be suspended
and the vehicle can be stopped. The doors are automatically locked before the vehicle
starts moving.
8
When the parking space is reached, after the vehicle is stopped by the parking
brake, the shift position will be changed to P, the power switch will be turned off,
the doors will be locked and the mirrors will be closed .
A completion screen will then be displayed on the smartphone.
Preparation before using Remote control function
Preparation before using
Make sure to perform the following before using Remote control function:
1. Download the Remote Park app from the app store.
472
→ P.462
button and then select [Perpendicular/parallel] .
Advertisement
Table of Contents
