Table of Contents
Advertisement
Staple Jams in Booklet Maker Unit for Finisher-B1
This section describes how to clear staple jam occurred in the staple cartridge of the Booklet
Maker Unit for Finisher-B1 (optional).
When Stale Jams occurs in Staple Cartridge R2 / R3
1.
Make sure that the machine is not operating,
and open the booklet maker side cover.
2.
With holding the tabs on both sides of the
booklet staple cartridge, lift the booklet staple
cartridge out of the unit.
3.
After you take out the booklet staple
cartridge, check inside of the Booklet Maker
Unit for any remaining staples.
4.
With holding the tabs, return the cartridge to
the original position, and then gently push the
cartridge in until it clicks into place.
5.
Make sure another booklet staple cartridge in
the same way.
6.
Close the booklet maker side cover.
Note
• If the booklet maker side cover is not completely closed, a
message will appear and the machine remains paused.
231
6.2 Stapler Faults
Advertisement
Table of Contents
