Table of Contents
Advertisement
3.
Adjust the paper guides to the size of the
paper.
Important
• Make sure that the guides are positioned lightly against
the paper. Paper guides that are positioned too tight or
two narrow can cause paper jams.
• Do not load paper above the maximum fill-line. Doing so
can cause paper jams.
Note
• When printing from the bypass tray, use the print driver to configure paper size and type settings. For more
information, refer to the online help for the print driver.
• When printing without using the print driver (such as lpr printing of a PDF file), use the printer's control panel
to configure the paper type setting. For more information, see "[Paper Type]" (P.179).
Bypass Tray Feed Orientations for Envelopes
When loading envelopes in the bypass tray, close the flaps of the envelopes and set them with
the address side facing down. Configure the print driver settings depending on the types of
envelopes and loading orientations as follows.
Envelope C4 (229 x 324 mm)
Paper feed
direction
Monarch Envelope (3.9 x 7.5")
No.10 Envelope(4.1 x 9.5")
DL Envelope (110 x 220 mm)
Paper feed
direction
Envelope C4 (229 x 324 mm)
Paper feed
direction
Envelope C5 (162 x 229 mm)
Paper feed
direction
Paper feed
direction
Note
• Register the paper size with the length of the flap included in [Custom Paper Size] when printing envelopes
with keeping the flap open. Configure the register paper size in [Original Document Size] as well as [Output
Paper Size], and then select [Portrait and landscape (For envelopes)] in [Image Rotation 180 Degrees].
Load the envelopes so they feed from the bottom of the envelopes (from the opposite side of the flap).
Configure the following settings by selecting [Paper/Output]
tab > [Paper] menu > [Advanced Paper Selection] dialog box.
• Original Document Size: Select the configured size of envelope
• Paper Tray: Tray 5 (Bypass)
• Bypass Paper Type: Envelope
Configure the following settings by selecting [Paper/Output]
tab > [Paper] menu > [Advanced Paper Selection] dialog box.
• Original Document Size: Select the configured size of envelope
• Paper Tray: Tray 5 (Bypass)
• Bypass Paper Type: Envelope
Configure the following settings by selecting [Paper/Output]
tab > [Paper] menu > [Mixed Sizes].
• Image Rotation 180 Degrees: Portrait and landscape (For envelopes)
111
4.2 Loading Paper
Advertisement
Table of Contents
