Fuji Xerox DocuPrint C5155d User Manual page 33

Note
• When specifying a port number, enter a ":" (colon) and then "80" (the factory default port number) after the
address. Verify the printer's port number by printing [Configuration Report].
• The port number can be changed under the [Properties] tab > [Connectivity] > [Protocols] > [HTTP]. If you
change the port number, you must enter a ":" (colon) and then the port number after the address.
• Displays a screen for entering the user name and password when the Authentication function is set. Enter the
ID and password of the administrator or user registered on the printer. Contact your administrator for
information on your ID and password. User information is displayed on the upper right when CentreWare
Internet Services is started up.
• After you logged in with the ID and password for administrator or the user registered in the printer to
configure and confirm settings, make sure to click [Logout] to log out the system in order to prevent the
leakage of information.
• When data encryption is enabled, enter "https" instead of "http" before the address when accessing
CentreWare Internet Services.
• For information about data encryption features, refer to "7.9 Security Features" (P. 331) and "7.11 Control Access to
Printer Features by Pre-registering Users" (P. 353).
1.6 Configuring the Printer Using CentreWare Internet Services
33