Table of Contents
Advertisement
Symptom
Printing is slow.
[Printing...] is displayed even
though there is no print job when
the USB interface is being used.
Image loss occurs in the upper
portion of the page.
Printing does not start from the
desired position on the page.
238
6 Troubleshooting
The buffer capacity may be too low. If you are printing a high-resolution document, use
[Allocate Memory] on the control panel to reduce the memory capacity of unused items,
which increases the capacity of the print page buffer.
Increasing the buffer capacity can speed up printing. Adjust buffer capacity in accordance
with the size of the print data.
Also, it is recommended to disable ports that are not being used and allocate memory for
other purposes.
Refer to
• " [Allocate Memory]" (P. 194)
Is [High Quality] or [High Resolution] selected for the [Image Quality] setting on the [Color
Options] tab of your print driver? Changing the [Image Quality] setting to [Standard] may
improve print speed.
Refer to
• Online help for the print driver.
Printing may be slow depending on the printing method for TrueType
printing method under [Specify Font] on the [Advanced] tab of your print driver.
Refer to
• Online help for the print driver.
Did you turn on your computer after switching on the printer? Press the <Cancel Job> button
to cancel printing.
Note
• Check to make sure that your computer is turned on before switching on the printer.
Are the paper guides adjusted properly?
Adjust the paper guides properly.
Refer to
• "4.2 Loading Paper" (P. 110)
Check whether the margins are set correctly on your print driver.
Refer to
• Online help for the print driver.
Cause/Remedy
®
fonts. Change the
Advertisement
Table of Contents
