Table of Contents
Advertisement
A.8
Installing the Gigabit Ethernet Board Kit
This section describes how to install the Gigabit Ethernet Board Kit on the printer.
Important
• The interface connecter for standard network cannot be used when the Gigabit Ethernet Board Kit is installed
to the printer.
Installing the Gigabit Ethernet Board Kit
1.
Press the <
switch to turn off the power.
Note
• Make sure that there is no indication on the display, and
<Energy Saver> button is off.
2.
Open the front cover.
3.
Press the <
power switch to turn off the main power and
close the front cover.
Note
• The <Main Power> lamp goes out on the control panel.
4.
Unplug the power cord from the power outlet
and the printer.
Gigabit Ethernet Board Kit
> side of the printer's power
> side of the printer's main
A.8 Installing the Gigabit Ethernet Board Kit
405
Advertisement
Table of Contents
