Table of Contents
Advertisement
4.
Take out the Paper Feed Rolls (3 sets).
Note
• Pull out the Paper Feed Roll with pressing down its tab.
5.
Install new Paper Feed Rolls.
Note
• When installing the Paper Feed Rolls, the tab of Paper
Feed Rolls clicks into the groove of the machine.
6.
Return Tray 1 to the original position.
7.
Switch on the power.
Resetting the Counter
After replacing the 200K Maintenance Kit, perform the required control panel operations to reset
their respective counters.
When replacing the 200K Maintenance Kit, be sure to reset the counter on the control panel.
1.
On the control panel, press the < > and <OK>
buttons at the same time.
This displays the [Consumables Menu].
2.
Press the < > until [Reset Counter] is
displayed.
3.
Press either the < > or <OK> button to select
so [Fuser Assembly] is displayed.
4.
Press the < > so [2ndBiasTrans.Roll] is
displayed.
5.
Press either the < > or <OK> button to select.
312
7 Maintenance
Consumables Menu
Serial Number
Consumables Menu
Reset Counter
Reset Counter
Fuser Assembly
ResetCounter
2ndBiasTrans.Roll
Press OK to reset
2ndBiasTrans.Roll
Advertisement
Table of Contents
