Table of Contents
Advertisement
2.
Take out the Odor Filter.
3.
Install a new Odor Filter.
Important
• Insert the Odor Filter as far as it will go.
4.
Attach the Cover R10.
Replacing the Suction Filter
1.
Switch off the power.
Important
• While the printer is in the Energy Saver mode, press the
<Energy Saver> button to exit the mode, and then switch
off the power.
Refer to
• For information on how to switch off the power and the
main power, refer to "2.2 Switching On/Off the Power"
(P. 46).
2.
Open Tray 5 (1), and then while lifting up the
release lever (2) gently open the upper left
cover A (3).
7.1 Replacing Consumables
307
Advertisement
Table of Contents
