Table of Contents
Advertisement
[Adjust Finisher]
Adjust the punch hole position or fold position when the Finisher-B1 (optional) and the Finisher-
B1 with Booklet Maker Unit (optional) is installed.
Admin Menu
Adjust Finisher
Setting
Hole Punch Tool
Punch Position
BookFoldPosition
Adjust Finisher
Hole Punch Tool
Adjust Finisher
Punch Position
Adjust Finisher
BookFoldPosition
Selects the type of installed hold punches (optional).
• 2/4 Hole Punch
• 2/3 Hole Punch (US)
Note
• This option can be set when 2/4 Hole Punch or 2/3 Hole Punch (US) is installed.
Selects the tray that the paper to use is set. You can also adjust the punch position.
• [Smaller than B4]
Selects the tray settings when using the paper of A4
can also adjust the punch position with 0.5mm increments in between 5.0 mm to
15.0 mm. The default value is 10.0 mm.
• [B4 or larger]
Selects the tray settings when using the paper of A3 or 11x17" size. You can also
adjust the punch position with 0.5mm increments in between 5.0mm to 15.0mm.
The default value is 10.0 mm.
Note
• This option can be set when 2/4 Hole Punch or 2/3 Hole Punch (US) is installed.
Selects the tray that the paper to use is set. You can also adjust the folding position.
• [Smaller than B4]
Selects the tray settings when using the paper of A4
can also adjust the staple or folding position with 0.5mm increments in between
0 mm to 10.0 mm. The default value is 0 mm.
• [B4 or larger]
Selects the tray settings when using the paper of A3 or 11x17" size. You can also
adjust the staple or folding position with 0.5mm increments in between 0 mm to
10.0 mm. The default value is 0 mm.
Note
• This option is displayed when Booklet Maker Unit for Finisher-B1 is installed.
Description
or 8.5x11"
or 8.5x11"
5.2 Common Menus Setting
size. You
size. You
199
Advertisement
Table of Contents
