Table of Contents
Advertisement
Print Universal Unique ID
UUID is an abbreviation for Universally Unique Identifier which is an assured unique128-bit
value. UUID printing feature prints UUIDs for each print job.
The printed UUIDs can be used as a search key to retrieve print job logs using an application,
such as the ApeosWare Accounting Service (purchase separately) or AposWare Log
Management (purchase separately).
Retrieving the image log with the UUID enables you to verify "when", "by whom", and "with what
service" the document was processed. This prevents leakage of confidential information.
Note
• For information about the Image Log Control feature, refer to "Security Feature Overview" (P. 331).
1.
Launch your web browser and access CentreWare Internet Services.
Note
• For information on how to access CentreWare Internet Services, refer to "1.6 Configuring the Printer Using
CentreWare Internet Services" (P. 30).
• If you are prompted to enter the administrator's ID and password, enter them and click [OK].
2.
Click the [Properties] tab.
3.
On the menu on the left, click [Security] > [Watermark] > [Universal Unique ID].
The [Universal Unique ID] screen is displayed.
4.
Configure the settings.
Print Universal Unique ID
Print Position
Print Position Adjustment
(Length Y)
Print Position Adjustment
(Width X)
Print Position (Side 2)
5.
After all the settings are completed, click [Apply].
338
7 Maintenance
Setting
Specifies whether or not to print the UUID.
• [No]
• [Yes]
Specifies the Universal Unique ID print position.
• [Top Left], [Top Center], [Top Right], [Bottom Left], [Bottom Center],
[Bottom Right].
Allows fine adjustment of the UUID vertical print position in the range of 0
to 100 mm.
Allows fine adjustment of the UUID horizontal print position in the range of
0 to 200 mm.
Note
• With 0 mm as the edges of the paper, a larger fine adjustment value shifts
the print position more towards the center of the paper. When [Top
Center] or [Bottom Center] is selected as the print position, however, the
horizontal fine adjustment value for the center of the paper is 100 mm.
When [Top Center] or [Bottom Center] is selected as the print position, first
set the fine adjustment value to 100 mm and then make fine adjustments.
Specifies the reverse side UUID print position.
• [Same as Side 1]
• [Mirror Side 1]
Description
Advertisement
Table of Contents
