Table of Contents
Advertisement
5.
Slowly slide the cleaning bars back into place.
Note
• Clean the four LED printheads (R1 to R4) by sliding the
cleaning bars back and fourth for two or three times,
respectively.
6.
Return the cover to the original position.
Note
• Push the cover until it clicks into place.
7.
Rotate the release lever clockwise to lock the
cover.
8.
Close the front cover.
Note
• If the front cover is not completely closed, a message will
appear and the machine remain paused.
244
6 Troubleshooting
Advertisement
Table of Contents
