Fuji Xerox DocuPrint C5155d User Manual page 149

[TCP/IP Settings]
Network/Port
TCP/IP Settings
Setting
IP Mode
IPv4 -
Settings
Get IP
Address
TCP/IP Settings
IP Mode
TCP/IP Settings
IPv4 Settings
Sets the IP mode.
• [IPv6]
The IPv6 mode is used. Advanced settings are unnecessary since it is
automatically configured.
• [IPv4]
The IPv4 mode is used. Set the IP address from [IPv4 Settings].
• [Dual Stack] (default)
Both the IPv4 and IPv6 modes can be used.
Sets the IPv4 settings
Sets the method of obtaining the information (IP address, subnet mask, or
gateway address) required to use the TCP/IP protocol.
• [DHCP/Autonet] (default)
Automatically obtains information from a DHCP (Dynamic Host
Configuration Protocol) server that has the AutoIP feature.
• [STATIC]
Sets the information manually on the control panel. Consult your network
administrator for the IP address.
• [DHCP]
Automatically obtains the information from the DHCP server.
• [BOOTP]
Automatically obtains the information from the BOOTP.
• [RARP]
Automatically obtains the information from the RARP.
Note
• When [DHCP/Autonet], [DHCP], [BOOTP], and [RARP] is changed to
[STATIC], a screen for setting the IP address is sometimes displayed.
Manually set the IP address when this screen is displayed.
IPv4 Settings
Get IP Address
IPv4 Settings
IP Address
IPv4 Settings
Subnet Mask
IPv4 Settings
Gateway Address
Description
5.2 Common Menus Setting
149