Table of Contents
Advertisement
7.8
Enabling a RAM Disk
The following describes how to enable a RAM Disk.
If you enable a RAM Disk, Sample Set/Secure Print/Private Charge Print/Charge Print/Delayed
Print can be used without installing the HDD Extension Kit (optional).
Important
• When using a RAM Disk, if you turned on and off the machine, all the stored documents will be removed.
Note
• When printing a large amount of data using a RAM Disk, the data to be transferred is divided.
1.
Press the <Settings> button on the control
panel to display the menu screen.
2.
Press the < > button until [Admin Menu] is
displayed.
3.
Press the < > or <OK> button to select.
[Network/Port] is displayed.
4.
Press the < > button until [System Settings]
is displayed.
5.
Press the < > or <OK> button to select.
[RAM Disk] is displayed.
6.
Press the < > or <OK> button to select.
7.
Press the < > button.
8.
Press the <OK> button.
Setting on the Print Driver's Property (Computer Side)
The following setting is required on the print drivers' property page. You need to specify the [RAM
Disk] to [Installed].
Refer to
• Refer to the print driver's online help for more information on print driver's each menu.
1.
From the [Start] menu, select [Printer and FAX] ([Printer] or [Devices and printer]
depending on the Operating System)].
2.
Select the printer icon on this printer, and then click [Properties] from the [File] menu.
Settings
LanguageEmulation
Settings
Admin Menu
Admin Menu
Network/Port
Admin Menu
System Settings
System Settings
RAM Disk
RAM Disk
• Disabled
RAM Disk
Enabled
7.8 Enabling a RAM Disk
329
Advertisement
Table of Contents
