Fuji Xerox DocuPrint C5155d User Manual page 142

[EtherTalk Compat]
Port Status
PJL
[Bonjour]
Port Status
142
5 Control Panel Settings
Network/Port
EtherTalk Compat
Setting
Sets whether to enable or disable the EtherTalk port at printer start-up.
• [Enabled]
• [Disabled] (default)
Important
• If the printer runs out of memory when the port is enabled, the port is sometimes
automatically disabled. If this happens, either disable unused ports, or change
the memory allocation under [Allocate Memory].
Sets whether to enable or disable PJL commands that are sent from the computer.
PJL commands control print jobs, and are required to print jobs using the print
driver. Use of PJL commands allows you to specify the language emulation for the
next job while another language emulation is being processed by the printer. (See
*5 on P. 202.)
• [Enabled] (default)
• [Disabled]
Network/Port
Bonjour
Setting
Sets whether to enable or disable the Bonjour port at printer start-up.
• [Enabled] (default)
• [Disabled]
Important
• If the printer runs out of memory when the port is enabled, the port is sometimes
automatically disabled. If this happens, either disable unused ports, or change
the memory allocation under [Allocate Memory].
Note
• To use the Multicast DNS feature, set [Enabled]. To use Bonjour to print on the
detector printer, also enable the LPD port.
EtherTalk Compat
Port Status
EtherTalk Compat
PJL
Description
Bonjour
Port Status
Description