Fuji Xerox DocuPrint C5155d User Manual page 144

Adobe Protocol
PS Wait Timeout
144
5 Control Panel Settings
Setting
Sets the PostScript communication protocol.
• [Normal] (default)
Select this when the communication protocol is in ASCII format.
• [Binary]
Select this when no special processing is required for data. Some data is printed
slower than with the [Normal] protocol.
• [TBCP]
Select this when the communication protocol is both in the ASCII and binary
formats, and switches between the two using control codes.
• [RAW]
Select this when the communication protocol is in Raw format. Select this item
when EPS files cannot be printed properly from Macintosh computers using a
USB interface.
Note
• Select an appropriate option according to the data format specified on your print
driver.
• [Adobe Protocol] is enabled only when printing in PostScript.
• Normally, use this setting at its default [Normal].
Sets the print waiting time for PostScript.
• [Disabled] (default)
[Auto Eject Time] of [USB] is used.
• [Enabled]
[PS Wait Timeout] for PostScript print driver is used.
Description