Printable Area; Built-In Fonts - Fuji Xerox DocuPrint C5155d User Manual

Printable Area

Note
• The actual printable area may vary depending on the printer control language.
Left 4.1 mm

Built-in Fonts

The fonts described below come built-in as standard. Note that the standard outline fonts cannot
be used with PostScript.
Note
• For information about fonts that are available with PostScript, refer to [Support Tools/Manuals] > [Media
Information] on the media (Software/Product Manual).
The manual for Macintosh can be found in the following folder of the media (Software/Product Manual)
• Manuals/Mac/English
Stroke fonts (for PCL5 and HP-GL/2)
European
Top 4.1 mm
Unprintable Area
Printable Area
Right 4.1 mm
Bottom 4.1 mm
• European Stroke fonts
ESC/P • Roman
• Sans Serif
PDF • Arial
• Arial Italic
• Arial Bold
• Arial Bold Italic
• Courier
• Courier Italic
• Courier Bold
• Courier Bold Italic
* If the actual print start position is less than 4.1
mm from the top edge, a paper jam may occur
depending on the type of image printed, the
type of the output paper, and the operating
environment of the printer.
* When you select the Long-size paper A (900 x
297mm), the length of the print assured area is
calculated by subtracting 12.3mm from the
length of paper.
* When you select the Long-size paper B (1200 x
297mm), the length of the print assured area is
calculated by subtracting 16.4mm from the
length of paper.
• Symbol
• Times New Roman
• Times New Roman Bold
• Times New Roman Italic
• Times New Roman Bold Italic
• ITC Zepf Dingbats
• Gold SEMM
• Gold SAMM
A.1 Main Specifications
387