Fuji Xerox DocuPrint C5155d User Manual page 26

2. Press the < > button until [Admin Menu] is
displayed.
Note
• If you went past the desired item, return to the item by
pressing the <
3. Press the < >or <OK> button to select.
[Network/Port] is displayed.
Note
• If you pressed the <
item, return to the previous screen by pressing the <
or the <Back> button.
• To start over from the beginning, press the <Settings>
button.
4. Press the < > or <OK> button to select.
[LPD] is displayed.
5. Press the < > button until [TCP/IP Settings] is
displayed.
6. Press the < > or <OK> button to select.
[IP Mode] is displayed.
7. Press the < > button until [IPv4 Settings] is
displayed.
8. Press the < > or <OK> button to select.
[Get IP Address] is displayed.
9. Press the < > or <OK> button to select.
The current set value is displayed.
10. Press the < > button until [STATIC] is
displayed.
11. Press the <OK> button to confirm your
selection.
If [000.000.000.000] appears, skip to step 15.
12. Press the < > or <Back> button to return to
[Get IP Address].
13. Press the < > button to display [IP Address].
26
1 Printer Environment Settings
> button.
> or <OK> button on the wrong
Settings
Admin Menu
Admin Menu
Network/Port
>
Network/Port
LPD
Network/Port
TCP/IP Settings
TCP/IP Settings
IP Mode
TCP/IP Settings
IPv4 Settings
IPv4 Settings
Get IP Address
Get IP Address
•DHCP/Autonet
Get IP Address
STATIC
Get IP Address
•STATIC
IPv4 Settings
Get IP Address
IPv4 Settings
IP Address