Notes And Restrictions On The Cloning Feature - Fuji Xerox DocuPrint C5155d User Manual

• Some features of SMB are not supported (If you attempt to use services with a NetBIOS name,
communication may not be available in some environment).
• IPv6-in-IPv4-tunneling in the machine itself is not supported.
Important
• If [TCP/IP Setting] > [IP Mode] is set to [IPv6], the IPv6-inIPv4-tunneling cannot be performed.
• If more than one router exist in the same subnet, a communication error may occur.
• In a dual stack environment, some services may cause performance problems depending on
the network settings (for example, when you attempt to set the machine to prioritize IPv6 in
an environment where the Web server is started with IPv4).

Notes and Restrictions on the Cloning Feature

The Cloning feature copies settings from one printer and imports them to another printer.
You can copy these settings to a file and import them with CentreWare Internet Services under
the [Properties] tab > [General Setup] > [Cloning].
This section lists the notes and restrictions that apply when using the Cloning feature.
• This feature does not copy and import all printer settings. It mainly copies and imports settings
on the [Properties] tab in CentreWare Internet Services.
The settings in the following categories can all be cloned.
Network/Port
Xerox Standard Accounting
Feature Category
Ethernet
USB
EtherTalk
NetWare
TCP/IP (IP Mode)
TCP/IP (IPv4)
TCP/IP (IPv6)
TCP/IP (DualStack)
SSDP
SMB
LPD
Port 9100
HTTP
IPP
Bonjour
WSD *
*WSD stands for Web Services on Devices.
ThinPrint
Users
Limits and Access
Group Accounts
A.10 Notes and Restrictions
419