Table of Contents
Advertisement
Error Code
016-746
Printing could not be performed because the PDF file contains a function that is not compatible with
the printer. s
Use Adobe Reader to open the PDF file, and then print by selecting the [Print] command on the [File]
menu.
016-748
Printing is not possible because of insufficient hard disk space.
Reduce the amount of print data by dividing the print data into multiple parts for individual printing.
You can also, delete unneeded data from the hard disk to free up space.
016-749
A JCL command syntax error occurred.
Check the print settings and correct the JCL command.
016-750
Though a print instruction was issued by ContentsBridge Utility or another application that directly
sends PDF or XML Paper Specification (XPS) data, the print job ticket sent along with the data included
grammar or print instructions that are not supported by this printer.
Check ContentsBridge or the other application sending the print job for operational problems and
problems with the print instruction content. If there are no such problems, contact the manufacturer of
the application.
If this does not resolve the problem, obtain the function setting list, assemble the configuration, job
history, and the print data connected to the print job ticked being sent, and contact our Customer
Support Center or your dealer.
016-751
A PDF file could not be printed using PDF Bridge.
Use Adobe Reader to open the PDF file, and then print by selecting the [Print] command on the [File]
menu.
016-752
A PDF file could not be printed using PDF Bridge because of insufficient memory.
If ContentsBridge Utility is being used, display the [Print Settings] dialog box to change the [Print
Mode] as described below.
• If [High Quality] is selected, change to [Standard].
• If [Standard] is selected, change to [High Speed].
Note
• To print a PDF directly without using ContentsBridge Utility, refer to " [PDF]" (P. 130) for information
about how to change the control panel setting to [PDF].
016-753
The PDF file password does not match the password set on the printer or the password set with
ContentsBridge Utility.
Specify the correct password on the printer or with ContentsBridge Utility and then try printing again.
Note
• To print a PDF directly without using ContentsBridge Utility, refer to " [PDF]" (P. 130) for information
about how to change the control panel setting to [PDF].
016-755
PDF files that are prohibited from being printed cannot be printed on the printer.
Use Adobe Acrobat to remove the PDF file's print prohibition and then try printing again.
Refer to
• Manual provided with Adobe Acrobat
016-756
Auditron Administration is enabled and you are not authorized to print on the printer. Contact your
administrator.
016-757
The entered passcode or user ID is not valid. Make sure if they are correct.
016-758
Auditron Administration is enabled and you are not authorized to use color printing. Contact your
administrator.
016-759
Auditron Administration is enabled and the maximum allowable number of print pages has been
reached. Contact your administrator.
Cause/Remedy
6.7 Error Messages and Error Codes
265
Advertisement
Table of Contents
