Table of Contents
Advertisement
Feature
Initialize Hard Disk
Reception control by IP
address
Control panel lock
Limiting access by user
registration
Image log
Watermark
Force Annotation
Audit Log
332
7 Maintenance
Description
Initializes all data remains in the hard desk.
You can also initialize all data in NV memory and the hard disk
(Delete All Data).
Note
• The HDD Extension Kit (optional) must be installed to use this
feature.
Data reception on the printer can be controlled by registering the
IP address of computers that are permitted to send data.
Limit user access to the control panel using passwords.
User information can be registered on the printer to limit access to
CentreWare Internet Services and printing from a computer.
Jobs that are executed on the printer are saved as image data and
accumulated and stored as logs along with job owner, printing
time, number of copies, and other data.
Note
• The Feature Enhance Kit (optional) and HDD Extension Kit
(optional) must be installed to use this feature.
Imprinting each page of a job with the date, a number, and a
watermark control code (digital code) deters reproduction of
confidential documents.
Note
• The Feature Enhance Kit (optional) and HDD Extension Kit
(optional) must be installed to use this feature.
Annotation is forcibly printed out according to the layout
template associated with each job type.
Note
• The Feature Enhance Kit (optional) and HDD Extension Kit
(optional) must be installed to use this feature.
Records when, who, and how any operation is performed on the
printer.
Refer to
" Hard Disk" (P. 200)
" Delete All Data" (P. 201)
"[IP Filter (IPv4)]" (P. 155)
or
"Controlling Data
Reception by IP Address"
(P. 333)
"[Panel Settings]" (P. 158)
"7.11 Control Access to
Printer Features by Pre-
registering Users" (P. 353)
To use this feature, contact
your dealer.
"[Image Log Control]"
(P. 175)
"Using the Watermark
Feature" (P. 334)
" Force Annotation Feature"
(P. 339)
"Using the Audit Log"
(P. 341)
Advertisement
Table of Contents
