Table of Contents
Advertisement
Note
• Paper quality [D] is suitable for coarse paper having
conspicuous transparent characters when held up against
the light.
Refer to "[Image Quality]" (P.196) for other settings.
10. Press the <OK> button to apply the setting.
11. To configure settings for other types of paper,
press the < > or <Back> button until the
screen in step 8 is displayed. Then repeat the
steps that follow.
To exit the setting operation, press the
<Settings> button to return to the [Ready to
print] screen.
Auto Tray Selection Feature
Printing while [Automatically Select] is selected for the [Paper] > [Select By Tray] setting on the
[Paper/Output] tab of the print driver, the printer automatically selects a paper tray based on the
size and orientation or paper type and color of the document to be printed. This feature is called
"Auto Tray Selection".
If there are several appropriate trays for the document, the printer applies [Paper Type] setting
specified in the control panel to [Paper Type Priority] to select a paper tray with the highest
priority. In this case, if the [Paper Type Priority] is set to [Auto Paper Off] for the type of paper in
the tray, it is not subject to Auto Tray Selection. If the [Paper Type Priority] setting is the same
for all of the paper types, the printer selects paper based on the [PaperTrayPriority] setting.
For example
Paper in the paper trays
Tray 1 A4 Recycled Paper
Tray 2 A4 Plain S2 Paper
Tray 3 A4 Plain Paper
Tray 4 A4 Plain Paper
Note
• Bypass tray is set to [No AutoTraySwitch] by default. Refer to "Setting Tray 5 (Bypass) for Auto Tray Selection"
(P.123) to set it for auto tray selection.
• The printer does not perform auto tray selection for the tray which is set to [No AutoTraySwitch] in [Paper Tray
Priority].
• If there is no tray that corresponds to the automatically selected tray, the printer will display a message
prompting you to load paper. You can program your printer not to display this message and have the printer
print the job on paper that is nearly the same size or larger than the document size (Substitute Tray feature).
• If a tray runs out of paper during printing, the printer automatically switches to another tray that contains
paper of the same size and orientation (Auto Tray Switch feature). The printer will not switch trays if the [Paper
Type Priority] is set to [Auto Paper Off] for the type of paper in the tray.
• You can assign names to paper of the same type and configure them as custom paper. For example, if blue
plain paper is loaded in one tray, you can name it "Plain blue" to differentiate it from other plain paper.
Refer to
• "[Printer Settings]" (P. 178)
122
4 Paper
Set
Paper Priority
Plain Paper
1st
Recycled Paper
1st
Plain S2 Paper
Auto Paper Off
1.Custom 1
Auto Paper Off
2.Custom 2
Auto Paper Off
3.Custom 3
2nd
4.Custom 4
Auto Paper Off
5.Custom 5
Auto Paper Off
Set
Paper Type
1st
Tray 1 Recycled Paper··
Auto Paper Off
Tray 2 Plain S2 Paper··
1st
Tray 3 Plain Paper·····
2nd
Tray 4 3.Custom 3······
Plain
•D
Set
Tray Priority
Tray 1
1st
Tray 2
2nd
Tray 3
3rd
Tray 4
4th
Tray 1 A4 Recycled Paper
Tray 3 A4 Plain Paper
Tray 1 A4 Recycled Paper
Advertisement
Table of Contents
