Table of Contents
Advertisement
2.3
Circuit Breaker
The printer is provided with a circuit breaker. In the event of a current leakage, the circuit breaker
will automatically cut off the power circuit to prevent any leakage of fire from occurring. Check
that the circuit breaker works properly at least once a month. Be sure to establish a ground for
the machine. Without a proper ground, the circuit breaker may be disabled, causing a risk of
electric shock.
If you have any problems with the circuit breaker, contact our Customer Support Center or your
dealer.
The following describes how to check the circuit breaker.
1.
Press the <
switch to turn off the power.
Note
• Make sure that the display is blank and the <Energy
Saver> button does not light up.
2.
Open the front cover.
3.
Press the <
power switch to turn off the main power.
Note
• The <Main Power> lamp goes out on the control panel.
4.
Press the <RESET> button.
Note
• Confirm that the button will stay pressed even after the
pushing force is released.
> side of the printer's power
> side of the printer's main
<RESET>
button
2.3 Circuit Breaker
49
Advertisement
Table of Contents
