Fuji Xerox DocuPrint C5155d User Manual page 140

PJL
TBCP Filter
[IPP]
Port Status
140
5 Control Panel Settings
Setting
Sets whether to enable or disable PJL commands that are sent from the computer.
PJL commands control print jobs, and are required to print jobs using the print
driver. Use of PJL commands allows you to specify the language emulation for the
next job while another language emulation is being processed by the printer. (See
*5 on P. 202.)
• [Enabled] (default)
• [Disabled]
Sets whether to enable or disable the TBCP filter during processing of PostScript
data.
• [Disabled] (default)
• [Enabled]
Network/Port
IPP
Setting
Sets whether to enable or disable the IPP port at printer start-up.
• [Enabled]
• [Disabled] (default)
Important
• If the printer runs out of memory when the port is enabled, the port is sometimes
automatically disabled. If this happens, either disable unused ports, or change
the memory allocation under [Allocate Memory].
Description
IPP
Port Status
IPP
Print Mode
IPP
PJL
IPP
Access Control
IPP
DNS
IPP
Added Port Number
IPP
Connect Time-Out
IPP
TBCP Filter
Description