Table of Contents
Advertisement
[Language]
Language
*1
When [Auto] is selected, data will be deleted if the language emulation automatically
selected is not present or is unavailable on the printer.
*2
Holding down the < > or < > button cycles through the options. To display a setting's
default value, press < > and < > at the same time.
*3
The following information is printed in each line during dump printing:
Count
Hexadecimal code
ASCII code
*4
Character List
*5
• When [Enabled] is set, and the print mode is set to [HexDump], PJL commands are also
• When language emulation not installed on the printer is specified by a PJL command,
*6
WSD stands for Web Services on Devices.
202
5 Control Panel Settings
Settings
Language
Setting
Sets the display language for the control panel.
• [English] (default)
The display language is English.
• [Trad. Chinese]
Displays screen messages in traditional Chinese.
• [Simp. Chinese]
Displays screen messages in simplified Chinese.
• [Korean]
Displays screen messages in Korean.
Prints the total number of bytes counted from the beginning of the
job data.
Prints print data delimited in 4 bytes in hexadecimal format.
Prints print data using JIS X0201 8-bit coded characters. Characters
that are not defined in JIS X0201 are printed as "UD".
No.
Type
1
Blank
2
Alphabet
3
Numerals
4
Symbols
output by [HexDump].
data is deleted.
Description
Characters
Space
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnop
qrstuvwxyz
0123456789
!"#$%&'()*+,-./:;q=r?@m\n^_`
Advertisement
Table of Contents
