Table of Contents
Advertisement
Setting
Print Mode
Sets the method of processing data (language emulation).
• [Auto] (default)
• [PS] [ESCP] [HP-GL/2] [PCL] [TIFF] [KS] [KSSM] [KS5895]
• [HexDump]
PJL
Sets whether to enable or disable PJL commands that are sent from the computer.
PJL commands control print jobs, and are required to print jobs using the print
driver. Use of PJL commands allows you to specify the language emulation for the
next job while another language emulation is being processed by the printer. (See
*5 on P. 202.)
• [Enabled] (default)
• [Disabled]
Access Control
Sets whether to enable or disable access control when stopping or deleting a print
job, pausing the printer, or when canceling a pause.
• [Disabled] (default)
• [Enabled]
DNS
Sets whether or not to use the name registered to the DNS (Domain Name System)
when identifying the printer.
• [Enabled] (default)
• [Disabled]
Added Port Number
Sets the additional port number from 1 to 65535. (See *2 on P. 202.)
• [80] (default)
Note
• Set only unique port numbers. Note, however, that InternetServices/IPP/SOAP/
Connect Time-Out
Sets the time after which data reception is canceled if data is not received. Specify
the value from 0 to 65535 seconds in 1-second increments.
• [60 Seconds] (default)
TBCP Filter
Sets whether to enable or disable the TBCP filter during processing of PostScript
data.
• [Disabled] (default)
• [Enabled]
After receiving data from a computer, the printer automatically detects its
language emulation and processes the data accordingly. (See *1 on P. 202.)
After receiving data from a computer, the printer processes the data with the
selected print language.
Allows you to view data received from a computer by printing it in ASCII code
(hexadecimal format). (See *3 on P. 202.)
The DNS name is used.
The IP address is used.
UPnP/WSD (See *6 on P. 202) ports and Internet services that use HTTP protocol
can share the same port number.
Description
5.2 Common Menus Setting
141
Advertisement
Table of Contents
