Figure 5-4 Removing the power cord (SPARC M10-4/M10-4S)
Figure 5-5 Removing the power cord (crossbar box)
5.5.3
Removing the front cover
When performing maintenance on a component from the front of a SPARC M10-4S
or crossbar box chassis, remove the front cover before starting the work.
1.
Release the right and left slide locks of the front cover and pull it towards the
front.
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ・ February 2014
68