Fujitsu M10-4 Service Manual page 192

XSCF> showstatus
14. Execute the showhardconf command to confirm the hardware configuration
and the status of each CPU memory unit.
Confirm that no asterisk (*) is displayed in front of each component.
XSCF> showhardconf
15. Execute the showdate command to confirm the XSCF time.
There is no need to set the time if the NTP server is set to the XSCF. Proceed to
step 17.
XSCF> showdate
16. If the XSCF time is different from the current time, execute the setdate
command to set the time.
Specify the time in either of the following formats:
yyyy.MM.DD-hh:mm:ss
MMDDhhmmyyyy.ss
In the following example, "October 20, 2013 16:59:00" is specified.
XSCF> setdate -s 102016592013.00
17. Close the rack door.
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･ February 2014
168
year.month.day-hour (24-hour clock):minute:second
monthdayhour (24-hour clock) minuteyear.second