Figure 22-4 Removing the cables
4.
Loosen the three screws securing the fan shelf and partially pull out the fan
shelf.
Figure 22-5 Removing the fan shelf
5.
Place a hand under the fan shelf to support it and then carefully remove it
from the chassis.
Note - Remove the fan shelf while paying careful attention to the two cables arranged in the
center.
Note - Place the removed fan shelf on a grounded antistatic ESD mat.
6.
Disconnect the two cables from the fan backplane.
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ・ February 2014
354