Fujitsu M10-4 Service Manual page 352

Figure 19-2 Lever of fan unit
2.
Carefully remove the fan unit from its slot.
Note - Place the removed fan unit on a grounded antistatic ESD mat.
19.5 Installing a Fan Unit
This section describes the procedure for installing a fan unit.
19.5.1 Installing a fan unit
1.
Carefully insert the fan unit into its slot.
Note - Do not force the fan unit into the slot. Using excessive force may damage the
component or the chassis.
2.
Push the fan unit fully home.
Note - Check that the fan unit is fully inserted and secured.
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･ February 2014
328
A