Chapter 8 Maintaining The Memory; Memory Configuration - Fujitsu M10-4 Service Manual

Chapter 8
Maintaining the Memory
This chapter describes the procedure for maintaining the memory mounted on the
SPARC M10-4/M10-4S. Memory can be replaced, expanded, and reduced.

Memory Configuration

■
Memory Configuration Rules
■
Before Maintaining Memory
■
Enabling the Removal of Memory
■
Removing Memory
■
Installing Memory
■
Restoring the System
■
8.1 Memory Configuration
This section describes the configuration and location of memory.
A maximum of 32 memory modules can be implemented in one CPU memory unit.
One chassis can contain two CPU memory units; the CPU memory unit upper and
lower. Therefore, the maximum number of memory modules that can be implemented
in one chassis is 64.
Figure 8-1
unit lower, while
shows the memory locations and the memory groups of the CPU memory
Figure 8-2 shows those of the CPU memory unit upper.
169