Removing Memory; Accessing Memory - Fujitsu M10-4 Service Manual

8.5

Removing Memory

This section describes the procedure for removing memory. Perform reduction using
the same procedure.
Enable the removal of the memory before you attempting to remove it. For details,
see "8.4 Enabling the Removal of
Caution - Before you handle any components, wear a wrist strap to ground any static
electricity. If you perform this procedure without a wrist strap, individual
components or the overall system may be damaged. For details, see
Regarding Static
8.5.1

Accessing memory

1.
Perform the preparations that must be completed prior to removing the CPU
memory unit.
For details, see
2.
Remove the CPU memory unit.
To remove the memory mounted on the CPU memory unit upper, see
Removing a CPU memory unit from the
To remove the memory mounted on the CPU memory unit lower, see
Removing a CPU memory unit from the
memory unit
8.5.2 Removing memory
1.
Open the clip of the memory slot outwards and remove the memory by pulling
it straight up.
Note - Place the removed memory on a grounded static-removal ESD mat.
Memory."
Electricity."
"7.4.1 Accessing a CPU memory
upper."
unit."
chassis."
chassis" and "7.4.3 Removing the CPU
Chapter 8 Maintaining the Memory
"1.5 Notes
"7.4.2
"7.4.2
183