Fujitsu M10-4 Service Manual page 70

Hide thumbs Also See for M10-4:

Table of Contents

Figure 4-3 　　 Active/cold maintenance (for SPARC M10-4S maintenance)

Physical partition (active)

Figure 4-4 　　 Active/cold maintenance (for dedicated power distribution unit

Physical partition (active)

Inactive/hot maintenance

Maintenance work is performed while the physical partition to which the

maintenance-target FRU belongs is powered off but the input power to the chassis

in which the target FRU is mounted is on (power cord is connected).

Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･ February 2014

maintenance)

Physical partition (active)

Physical partition (active)

Physical partition (active)

Physical partition (active)

M10-4sSparc m10-4Sparc m10-4s