Fujitsu M10-4 Service Manual page 67

1.
Log in to the control domain console of the physical partition where the
component to be maintained is mounted.
For information on logging in to the control domain console, see "8.2 Switching
to the Control Domain Console from the XSCF Shell" in the Fujitsu M10/SPARC
M10 Systems System Operation and Administration Guide.
2.
Execute the pkg(1) command to display Oracle Solaris correction information
and version.
- For Oracle Solaris 11, execute the pkg(1) command.
# pkg info entire
Name: entire
Summary: entire incorporation including Support Repository Update
(Oracle Solaris 11.1.12.5.0).
- For Oracle Solaris 10, execute the showrev(1M) command.
# showrev -p
For the Oracle VM Server for SPARC version, execute the ldm(1M) command.
# ldm -V
Logical Domains Manager (v 3.1)
Hypervisor control protocol v 1.9
Using Hypervisor MD v 1.3
Confirming the firmware configuration
Use XSCF shell commands to check the firmware configuration.
Table 4-3
Table 4-3 Commands for checking the firmware configuration
Command
version
showhardconf
showstatus
showboards
showpcl
showfru
lists the commands for checking the firmware configuration.
Description
Displays the current firmware version information.
Displays information on components mounted in the chassis.
Displays the status of a component. Of the FRUs comprising the
system, this command displays information on a unit or
component that is faulty or degraded.
Displays information on a physical system board (PSB). Displays
information on a physical system board that belongs to the
specified physical partition and information on all the physical
system boards that are mounted.
Displays the configuration information for a physical partition
(hardware resource information).
Displays the setting information for a device.
Chapter 4 Preparing for Maintenance 43