Removing The Front Cover With Lock; Shutting Down The Server - Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual

Basic hardware procedures
4.2

Removing the front cover with lock

Figure 2: Turning the key
▶ Insert the key.
▶ Turn the key in open position.
Figure 3: Removing the front cover
▶ Push in the lock on the left side (1) and remove the front cover in a slight
angle from the front (2).
4.3

Shutting down the server

CAUTION
▶
For more information, see
This step is only required when upgrading or replacing non-hot-plug
components.
52
"Important information" on page
Upgrade and Maintenance Manual
35.
RX2540 M6