Fujitsu M10-4 Service Manual page 248

Figure 12-1 Location of internal disks
Location number
1
2
3
4
5
6
7
8
12.1.1 Identification of disk slot
To perform active replacement of an internal disk drive, you need to know the
physical device name or logical device name of a drive to be installed or removed. If
a disk error occurs in the system, from the system console, you can normally check
for messages regarding a disk that is likely to fail or that has already failed. This
information is also recorded in the /var/adm/messages file.
These error messages normally indicate the internal disk drives in which the errors
have occurred by their physical or logical device names. In addition, depending on
the application, the slot number of the disk may be reported.
Procedure to confirm the mounting position information on the HDD varies
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･ February 2014
224
(1) (2) (3) (4) (5) (6)
Component
Internal disk (HDD#0)
Internal disk (HDD#1)
Internal disk (HDD#2)
Internal disk (HDD#3)
Internal disk (HDD#4)
Internal disk (HDD#5)
Internal disk (HDD#6)
Internal disk (HDD#7)
(7) (8)