Fujitsu M10-4 Service Manual page 392

Figure 23-9 Operation panel cable
23.5.2 Restoring the chassis
1.
Support the fan shelf from below with one hand and insert it into the chassis.
Then, tighten the three screws.
2.
Connect the two cables to the fan shelf.
3.
Install the lower cover and then secure it with the one screw.
4.
Install the upper cover and slide the right and left stoppers outwards. Then,
tighten the two screws to secure the upper cover.
5.
Install all the fan units.
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･ February 2014
368
Front