Fujitsu M10-4 Service Manual page 429

Chapter 27
Maintaining the XSCF DUAL Control
Cables
This chapter describes the procedure for maintaining the XSCF DUAL control cables.
Configuration of the XSCF DUAL Control Ports
■
Before Maintaining an XSCF DUAL Control Cable
■
Enabling the Removal of an XSCF DUAL Control Cable
■
Removing an XSCF DUAL Control Cable
■
Installing an XSCF DUAL Control Cable
■
Restoring the System
■
27.1 Configuration of the XSCF DUAL
Control Ports
This section describes configuration and location of the XSCF DUAL control ports.
The XSCF DUAL control cable is used to connect the master XSCF and a standby
XSCF that are mounted on a SPARC M10-4S or crossbar box so as to duplicate the
XSCF.
405