Note - In the case of a dual power feed, connect the power cords in their original positions by
referring to the record that you made before the start of maintenance.
2.
Return to the operation of the XSCF firmware replacefru command to confirm
that SPARC M10-4S has been incorporated into the system.
For details, see
the
3.
Power on all the physical partitions.
For details, see
4.
Close the rack door.
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ・ February 2014
404
"6.1.1 Incorporating an FRU of the SPARC M10-4/M10-4S into
system."
"6.3 Powering On the Physical Partition Requiring
Maintenance."