How To Set Up User-Defined Displays - Agilent Technologies N4413A User Manual

• The system allows you to assign a trace to a memory location using the DATA → MEM
function. Memorized traces turn dark blue. If you click Identify MEM, the identified trace
turns dark blue while the other traces turn light blue-green. You can load or measure and
memorize as many traces as your memory will support, but there can only be one current
(red) trace. Memorized traces are assigned identification numbers in the order in which
they are memorized.
• Traces that are the result of trace math appear violet.
For more information, see

How to Set Up User-Defined Displays

User-defined displays provide a convenient way to set up new display types based on formulas
you specify. You can use conventional S-parameters and mixed-mode S-parameters in
expressions with operators and constants to analyze data.
NOTE User-defined displays are saved and can be loaded with display configurations.
See "Data > User-Defined Display > Add Page..." on page 139
Chapter 3
"Data > Memory..." on page
Using the Multiport Test System
How to Set Up User-Defined Displays
136.
for more information.
49