Agilent Technologies N4413A User Manual page 127

Menu Reference
Setup Menu
Click Enable De-Embed to turn de-embedding on.
Click Perform De-Embed Now to perform de-embedding on the current data set. Perform
De-Embed Now is only available when de-embedding has been turned on with Enable
De-Embed (see above).
Click Disable De-Embed to turn de-embedding off.
Click Revert to Measured Data Now to remove any previously applied de-embedding from
the current data set. Revert to Measured Data Now is only available when de-embedding
has been turned off with Disable De-Embed.
Click Disable De-Embed + Clear All to turn off de-embedding and clear all the applications
of probe, fixture, or adapter files.
When de-embedding is enabled, the DMB On indicator is displayed in the upper right part of
the main screen.
Chapter 5 117