Agilent Technologies N4413A User Manual page 114

Menu Reference
File Menu
Enter the file name and click Save to save the file.
NOTE Exporting to an invalid format may cause data loss. For example, exporting
3-port data in S4P format would create an empty data file (filename.S4P).
If transforms are on, user-defined equations are in use, or markers have been defined, the
Export dialog box appears.
For all formats but the S2P Mixed-Mode By Quadrant format, the Export dialog box looks like
this:
Select which types of data to export by checking the appropriate boxes. For example, if you
want to export only marker data, check Export Marker Data Only and uncheck the rest of
the boxes. If some types of data are not available in the current data set, the corresponding
boxes are grayed out.
Click OK to export the file. Click Cancel to return to the main screen without exporting the
file.
S2P Mixed-Mode By Quadrant Format
Each quadrant of the mixed-mode s-matrix of a balanced two-port can be considered as a 2×2
s-matrix for a given mode of operation. Each quadrant can be exported so that it can be read
into a circuit simulator. The display must be in 4-port mode with transforms for 2 balanced
ports turned on.
104 Chapter 5