ID
Front Panel
Number
Feature
4
B
5
POWER
6
GPIB
STATUS
7
AUXILIARY
8
PORT 4
9
PORT 3
10
PORT 2
11
PORT 1
Chapter 7
Feature Description
Type-N (f) 50Ω connector that is connected to the network
analyzer B port.
ON/OFF switch that disconnects the mains circuits from the
mains supply before other parts of the test set. The front
panel POWER switch disconnects the mains circuits from the
mains supply after the EMC filters and before other parts of
the instrument.
Three LEDs (R, T, and L) that display the GPIB status of the
test set when it is communicating with the network analyzer.
R = Remote Operation, T = Talk mode, L = Listen mode.
15-pin ribbon (f) connector that may be connected to the
Agilent N4430A/B ECal module to provide ECal capability.
APC-3.5 (f) connector that is connected to the DUT or fixture.
(+17 dBm maximum operating level)
APC-3.5 (f) connector that is connected to the DUT or fixture.
(+17 dBm maximum operating level)
APC-3.5 (f) connector that is connected to the DUT or fixture.
(+17 dBm maximum operating level)
APC-3.5 (f) connector that is connected to the DUT or fixture.
(+17 dBm maximum operating level)
Instrument Information
Front and Rear Panels
165