Agilent Technologies N4413A User Manual page 188

Instrument Information
Front and Rear Panels
N4416A Rear Panel
ID Rear Panel
Number Feature
1 REF 2 R IN
2 PORT 4 BIAS
3 PORT 4
FUSE
4 PORT 2
FUSE
5 PORT 2 BIAS
6 BUS
ADDRESS
7 REF 1 R IN
8 REF 1 R OUT
9 IEEE-488
178
Feature Description
SMA (f) connector, used as an input reference signal
BNC (f) connector. The bias port is used to supply a dc voltage
to an active DUT, such as an amplifier or a transistor.
Bias Fuse, 0.5 A, 250 V (Agilent part number 2110-0012)
Bias Fuse, 0.5 A, 250 V (Agilent part number 2110-0012)
BNC (f) connector. The bias port is used to supply a dc voltage
to an active DUT, such as an amplifier or a transistor.
Switch that is used to set the GPIB address. Refer to
the GPIB Addresses" on page 38
SMA (f) connector, used as an input reference signal
SMA (f) connector, used as an output reference signal
24-pin IEEE-488/PCB (f) connector. The GPIB is the
communication bus with the PC and the network analyzer.
for further information.
Chapter 7
"To Set