Agilent Technologies N4413A User Manual page 132

Menu Reference
Setup Menu
Click Set Display to apply the associated display configuration.
Click Capture Config to capture the current display configuration. Enter a
configuration identification in the Config Identifier box. The configuration identification
must be unique to that configuration file.
Click Erase Config to remove that configuration from the system. Erase Config
removes the configuration immediately, so make sure you have saved the configuration(s)
before using Erase Config if you want to keep the configuration information for later use.
Use the RESTORE OPTIONS selections to select which parts of a display configuration will
be used. Select from All Displays, Primary Display Only, and User-Defined Display
Only. All Displays includes both the primary and any user-defined displays. The primary
display is the S-parameter or mixed-mode S-parameter display.
122 Chapter 5