How To Characterize Passive Devices - Agilent Technologies N4413A User Manual

How to Characterize Passive Devices

This section describes characterization of a quadrature hybrid passive device as shown.
1. Install the system hardware and software, if needed. See
Test System Hardware" on page 18
Measurement Software" on page
2. Determine what network analyzer power, frequencies, and data points will be needed for
characterization of the DUT.
3. Calibrate the system using these settings. See
4. Connect the DUT.
5. Click the Measure button to measure the DUT.
Chapter 3
and "How to Install and Start the Balanced
39.
"How to Calibrate" on page
Using the Multiport Test System
How to Characterize Passive Devices
"How to Set Up the Multiport
40.
57