Agilent Technologies N4413A User Manual page 184

Instrument Information
Front and Rear Panels
N4415A Rear Panel
ID Rear Panel
Number Feature
1 REF 1 R OUT
2 REF 2 R OUT
3 PORT 4 BIAS
4 PORT 4
FUSE
5 PORT 2
FUSE
6 PORT 2 BIAS
7 BUS
ADDRESS
8 IEEE-488
9 REF 2 R IN
174
Feature Description
SMA (f) connector, used as an output reference signal
Not Used
BNC (f) connector. The bias port is used to supply a dc voltage
to an active DUT, such as an amplifier or a transistor.
Bias Fuse, 0.5 A, 250 V (Agilent part number 2110-0012)
Bias Fuse, 0.5 A, 250 V (Agilent part number 2110-0012)
BNC (f) connector. The bias port is used to supply a dc voltage
to an active DUT, such as an amplifier or a transistor.
Switch that is used to set the GPIB address. Refer to
the GPIB Addresses" on page 38
24-pin IEEE-488/PCB (f) connector. The GPIB is the
communication bus with the PC and the network analyzer.
Not Used
for further information.
Chapter 7
"To Set