Agilent Technologies N4413A User Manual page 196

Instrument Information
Front and Rear Panels
N4418A Rear Panel
ID Rear Panel
Number Feature
1 REF 1 R OUT
2 REF 2 R OUT
3 PORT 4 BIAS
4 PORT 4
FUSE
5 PORT 2
FUSE
6 PORT 2 BIAS
7 BUS
ADDRESS
8 IEEE-488
9 REF 2 R IN
186
Feature Description
SMA (f) connector, used as an output reference signal
SMA (f) connector, used as an output reference signal
BNC (f) connector. The bias port is used to supply a dc voltage
to an active DUT, such as an amplifier or a transistor.
Bias Fuse, 0.5 A, 250 V (Agilent part number 2110-0012)
Bias Fuse, 0.5 A, 250 V (Agilent part number 2110-0012)
BNC (f) connector. The bias port is used to supply a dc voltage
to an active DUT, such as an amplifier or a transistor.
Switch that is used to set the GPIB address. Refer to
the GPIB Addresses" on page 38
24-pin IEEE-488/PCB (f) connector. The GPIB is the
communication bus with the PC and the network analyzer.
SMA (f) connector, used as an input reference signal.
for further information.
Chapter 7
"To Set