Menu Reference
Setup Menu
Setup > Cal Kit Selection...
Pull down Setup > Cal Kit Selection... to open the Select Calibration Kit dialog box and
select the calibration kits to use with the system.
The system supports assignment of calibration kits per port. Select a calibration kit from each
of the drop-down lists.
Click OK to confirm the selection.
Click Cancel to quit the dialog box without changing the calibration kit selection.
The multiport test system comes with a number of predefined calibration kits. You can also
add your own calibration kits by editing the calkits.txt file. The default location of this file is
..\Program Files\Agilent\system\, the actual location may be different.
Editing instructions are included in the file. Make sure you edit and save the file in ASCII
text only format.
Maintain a copy of your unmodified (original) calkits.txt file in a safe location.
NOTE
The selections you make in this dialog box are used in other parts of the software, such as
de-embedding and thru adapter usage selections, to determine the connector types of the
cables. Make calibration kit selections before making these other settings.
112
Chapter 5